Panel Radyatör Yedek Parçaları

Kompak Ventil Tip 11-21-22-33;
Gizli radyatör tesisatlarında ve termostatik vananın kullanım amacı için üretilen panel radyatörlerin su dağıtım elemanıdır. Firmaların isteklerine göre istenilen boyutlarda yapılabilmektedir. . &nbsp;

Kompakt Ventil 

Kompakt Ventil - Panel Radyatör

Kompak Ventil

Kompakt Ventil | Art Teknik

Compak Ventil for Type 11,21,22,33;
Hided component in panel radiator, used for correct water distribution and gives an ability to use termostatic valve . Can be produced under requested dimensions.

Compak Ventil

Compak Ventil for Type 11,21,22,33

Compak Ventil products

Compak Ventil | Art Teknik

НИЖНЕЕ ПОДКЛЮЧЕНИЕ ТИП 11,21,22,33 ;
Скрытый элемент в панельном радиаторе, используюмый для дистрибьюции воды и использовании термостата.
Изготавливается соглано требованиям Фирмы-покупателя.&nbsp;

НИЖНЕЕ ПОДКЛЮЧЕНИЕ

НИЖНЕЕ-ПОДКЛЮЧЕНИЕ

 НИЖНЕЕ ПОДКЛЮЧЕНИЕ ТИП 11,21,22,33

НИЖНЕЕ ПОДКЛЮЧЕНИЕ | Art Teknik

ARTIZ SPRING BRACKET is designed for raditors with or without compact ventil. It is a patented product.

ARTIZ-Self-Lockable-Spring-Bracket

ARTIZ Self Lockable Spring Bracket

ARTIZ-Self-Lockable-Spring-Bracket-2

ARTIZ-Self Lockable Spring Bracket-1

ARTIZ-Self-Lockable-Spring-Bracket-3

ARTIZ-Self-Lockable-Spring-Bracket-4

ARTIZ-Self-Lockable-Spring-Bracket-5

ARTIZ-Self-Lockable-Spring-Bracket-6

ARTIZ-Self-Lockable-Spring-Bracket-7

ARTIZ-Self-Lockable-Spring-Bracket-8

ARTIZ-Self-Lockable-Spring-Bracket-9

ARTIZ-Self-Lockable-Spring-Bracket-10

ARTIZ-Self-Lockable-Spring-Bracket-11

ARTIZ-Self-Lockable-Spring-Bracket-12

ARTIZ-Self-Lockable-Spring-Bracket-13

ARTIZ Self Lockable Spring Bracket. Patented.

ARTIZ Self Lockable Spring Bracket | Art-Teknik

Bracket for type 11 is designed for radiators without welded hangers on the rear side (for Ventil Compact radiators). The bracket holds the lower and top edge (top cover) of the radiator. The upper holder is made of plastic with of glass fibres which gives it excellent firmness. The plastic part of the holder is covered with metal cap which fastens on the top cover of the radiator. Bracketexcels in quick fixing as the upper plastic holder automatically springs into position and locks the radiator. &nbsp;

spring bracket

Spring Bracket Type 11

Spring Bracket

spring bracket 11

Spring Bracket Type 11 | Art Teknik

Bracket for type 22,21 is designed for radiators without welded hangers on the rear side (for Ventil Compact radiators). The bracket holds the lower and top edge (top cover) of the radiator. The upper holder is made of plastic with of glass fibres which gives it excellent firmness. The plastic part of the holder is covered with metal cap which fastens on the top cover of the radiator. Bracketexcels in quick fixing as the upper plastic holder automatically springs into position and locks the radiator.

Spring Bracket Type 21-22

spring bracket 22,21

Spring Bracket | Art Teknik

PACKAGE: 2 bracket, 4 M8x70 trifon screws, 4 Ø10 dowels.
An air vent and a blind plug are added on request.

Self locking Spring Bracket

Self Locking Spring Bracket - Patented Product

Patented Product

Self locking Spring Bracket (Patented Product)

Self locking Spring Bracket | Art Teknik

<span style="color: rgb(0,0,0);background-color: rgb(255,255,255);font-size: medium;font-family: ui-sans-serif, system-ui, -apple-system, "system-ui", "Segoe UI", Roboto, "Helvetica Neue", Arial, "Noto Sans", sans-serif, "Apple Color Emoji", "Segoe UI Emoji", "Segoe UI Symbol", "Noto Color Emoji;">PACKAGING: 2 pcs of floor bracket, 4 plastic feet cover, 4 screws M8x70 and 4 Ø10 dowel.

Floor bracket for central connection

Floor Bracket for Central Connection Type 22-33

floor bracket central connection

Floor bracket for central connection type 22/33



Floor bracket for central connection | Art Teknik

PACKED : 1 bracket, 2 pegs, Ø10 and 2 screws M8x70. 
T Box : 1 bracket, 2 plastic rosettes, 2 pegs Ø10 and 2 screws M8x70 (in a small cardboard box). On request is added air vent plugs and blind plugs.

Floor Bracket

Floor Bracket Type 22-33

Floor Bracket | Art Teknik

Packed / set:
2 upper parts of bracket, 2 lower parts of bracket, 4 plugs Ø10 and 4 screws M8×60. * extra: air vent and blind plug ½’’.&nbsp;

Part Bracket

part bracket fc

Part Bracket fc

Part Bracket | Art Teknik

The ½ vent plug is used to reduce the temperature in the panel radiator and towel radiator. Thanks to the silver cover, it provides a more aesthetic appearance.

1/2 Air Vent with Silver Plastic

Air Vent with Silver Plastic

Air Vent with Silver Plastic | Art Teknik

nipel m22

M22 Nipel

M22 Nipel | Art Teknik

3/8 blind plug

Blind Plug

Blind Plug | Art Teknik

(inside ¾ threads with hole)
Produced of 100% quality MS58 brass. 
Can be produced in 2 different ways:
<ul>
<li>Without nickel coating, with No-burning O-ring, than can hold up to 200 degree temperature in painting line.</li>
<li>With nickel coating, and with rubber O-ring.&nbsp;</li>
</ul>

1/2 Reducerring

1/2 Reducerring | Art Teknik

ACCESSORY BAGS are used while mounting radiators to the Wall or floor, and may include:
<ul>
<li>Air vent</li>
<li>Blind plug</li>
<li>Plastic anchors</li>
<li>Screws</li>
<li>Plastic radiators protectors</li>
<li>Plastic key</li>
<li>Top grill holder</li>
</ul>
May be packed according to special request. &nbsp;

Accessory Bag

Accessory Bag | Art Teknik

½ mechanical air vent is used with design radiators and towel warmer radiators to dump the temperature, which circulating in radiator. Air vents are procuced of calibrated brass and has the high resistance ability.

1/2 Mechanical Air Vent

Mechanical Air Vent

Mechanical Air Vent | Art Teknik

1/2 Brass Plug With No Burning O-Ring;
½ plug is using for panel radiators to use directly on painting line, special O-ring can hold up to 200 degrees, to receive quite esthetic look of radiator after painting.
We are able to produce special types of plugs according to customer`s demans. Air vents are procuced of calibrated brass and has the high resistance ability

1/2 Brass Plug With No Burning O-Ring

Brass Plug With No Burning O-Ring

Brass Plug With No Burning O-Ring | Art Teknik

1/2 Blind Plug;
1/2 Blind plug is used on panel radiators and towel radiators.
It is possible to produce according to company requests.
The plugs are made of high pressure calibrated brass materials.

1/2 Blind Plug

1/2 Air Vent;
½ air vent is used with steel panel radiators and towel warmer radiators to dump the temperature, which circulating in radiator. Air vents are procuced of calibrated brass and has the high resistance ability.

1/2 Air Vent

Air Vent

Air Vent | Art Teknik

Plastic Bottom Suspended Plug

D405 Plastic Bottom Suspended Plug

Plastic Bottom Suspended Plug | Art Teknik

Plastic Top Suspended Plug

D404 Plastic Top Suspended Plug

Plastic Top Suspended Plug | Art Teknik

Plastic Plug

D421 Plastic Plug

Plastic Plug | Art Teknik

Bracket Protection

Bracket Protection | Art Teknik

Corner Protection 11,22,33;
Material – PP, color may be grey or red (RAL may be applied on extra fee).&nbsp;

Corner Protection

Material description: Usage of aprox. 1% of Cobalt, 1$ of Nickel and 0,5% of Berlium contains solutioning and aging heat treatment of hot forging with post-high hardness and strength obtained, of the copper alloys good thermal conductivity. The heat treatment conditions can be obtained by different combinations of displacement with the hardness and conductivity.

Welding Rod

Welding Rod | Art Teknik

Welding Electrode For Panel Radiators Welding Line

Welding Electrode For Panel Radiators | Art Tek

Welding Disc for Panel Radiators Welding Line

Welding Disc for Panel Radiators Welding Line | Art Teknik

<span style="color: rgb(0,0,0);background-color: rgb(255,255,255);font-size: medium;font-family: ui-sans-serif, system-ui, -apple-system, "system-ui", "Segoe UI", Roboto, "Helvetica Neue", Arial, "Noto Sans", sans-serif, "Apple Color Emoji", "Segoe UI Emoji", "Segoe UI Symbol", "Noto Color Emoji;">T Fitting Type 21,22,33;
Used in panel radiators for correct water distribution between the panels.&nbsp;

T Fitting

T Fitting Type 21-22-23

T fitting-product

t fitting-art-teknik

T fitting

T Fitting | Art-Teknik

During the production of the radiator, they are welded onto the rear wall of the radiator, used with a standard radiator connection.&nbsp;

Radiator Bracket

Radiator Bracket | Art-Teknik

300-1000 mm&nbsp;
These fasteners are used in standard radiators, without bottom and side connection, they are attached to the wall with screws and dowels, and put on the radiator fasteners welded on the back.&nbsp;

L Bracket

L Console

L Bracket | Art Teknik

Used in type 33.10 radiators. It can be made in different sizes, according to the drawing of the Buyer.&nbsp;

Panel Radiator Pipe

Panel Radiator Pipe | Art Teknik

Produced from steel DIN EN 10111-98 DD 11&nbsp;
The outside diameter can be 24mm 25mm and 26mm. Under the pressure of 3 1674N no deformation detected
There are 8 pcs of back up ring used in one panel radiator.&nbsp;

Back Up Ring

Back Up Ring-25mm

Back Up Ring 25mm

Back Up Ring | Art Teknik

L Fitting Type 11;
Type 11 is used for water distribution in panel radiators.

Our Products

Kompakt Ventil - Panel Radyatör

PRODUCT FEATURES

TECHNICAL INFORMATION

Recommended Products

ARTIZ Self Lockable Spring Bracket

Spring Bracket Type 11

Spring Bracket Type 21-22

Self Locking Spring Bracket - Patented Product

Product Groups

Quality and Certificates

Contact Us